注射液体心理压力（MPa）:

1、针剂压差差，好多后会将该参数设置误看来是针剂时油缸只受到的液压机系統压强；说真的并不意味着这些，针剂压差差一样 指压铸机在针剂时，

熔融奶茶原料加入模腔时在料筒内受到的到的公司的占地面积的压强，公司的为MPa。

2、造价工程师们说的平台是在打瘦脸针时打瘦脸针油缸里的液压多路阀油；而正确无误的大概是平台为在打瘦脸针时料筒内熔融原辅材料。

3、此双方数值是完全有所差异，达数倍的相差太多，其度数运算似的为：针剂油缸体积计算/螺丝杆孔径断体积计算。

Injection pressure (MPa) :

1. Injection pressure, many people will mistake this parameter for the hydraulic system pressure suffered by the cylinder during injection; Actually, it's not. The injection pressure usually means that when the injection machine is injected,

The pressure per unit area of the cylinder on which the molten material is injected into the mold cavity, unit is MPa.

2, the former said that the carrier is in the injection of hydraulic oil in the cylinder; The correct carrier should be the molten material in the cylinder during injection.

3, the two data are completely different, up to several times the difference, the multiple calculation is generally: injection cylinder area/screw diameter cross-sectional area.